This CNC Contour Cutting MACHINES can precisely cut blocks of Flexible PU Foam Polyether/ Polyester/ Latex Foam/ Rebounded Foam with ease. The knife is pivoted on the front edge to cut sharp edges & corners
| Cutting Width :- | 2300 mm |
| Cutting Length :- | 2300 mm |
| Cutting Height :- | 1300 mm |
| Knife Degree of Rotation :- | 370 Degree |
| Table Rotation :- | 90 Degree Manual/ Automatic (Optional) |
| Central Knife Guidance :- | Available (Optional) |
| Knife Grinding :- | Motorized with CBN wheels |
| Dust Removal :- | Motorized Blower |
| File Input :- | Standard DXF Files can be cut directly with the MACHINES software & knife rotation is automatically controlled |
Above chemicals are with metering unit & inject valves, strainer, ball valve Pipings & tanks are not included.
| Cutting Width :- | 2500 mm |
| Cutting Length :- | 2500 mm |
| Cutting Height :- | 1300 mm |
| Knife Degree of Rotation :- | 370 Degree |
| Table Rotation :- | 90 Degree Manual/ Automatic (Optional) |
| Central Knife Guidance :- | Available (Optional) |
| Knife Grinding :- | Motorized with CBN wheels |
| Dust Removal :- | Motorized Blower |
| File Input :- | Standard DXF Files can be cut directly with the MACHINES software & knife rotation is automatically controlled |
#Windows based Computer controlled MACHINES control with easiest user friendly DXF file input from CAD makes designing to cutting a matter of minutes
*.Unlimited Designs & DXF files can be saved on the MACHINES computer to cut at any date.
*.Optional Nesting software for automatic nesting & cutting of parts.
*.Axis Jog modes for positioning ease of cutting head both from the computer & operator Hand held remote controller with selectors & MPG control.
*.Windows based Computer controlled MACHINES control with easiest user friendly DXF file input from CAD makes designing to cutting a matter of minutes.
*.Unlimited Designs & DXF files can be saved on the MACHINES computer to cut at any date.
*.Optional Nesting software for automatic nesting & cutting of parts.
*.Axis Jog modes for positioning ease of cutting head both from the computer & operator Hand held remote controller with selectors & MPG control.
*.Anti collision safety provided in the MACHINES for cutting head & holding frame.
*.Long life & Low cost Band knife used in comparison with oscillating knife type machines.
*.Linear guide ways are used for movements of X & Y axis for smooth accurate cutting.
*.Brushless AC Servo motors used on all the axis for trouble free operation.>
*.Table can be rotated 90 degree automatically for 3 D cutting & slicing.
*.Grinding device with motor-driven CBN cup wheels.
*.Grinding dust is exhausted & collected.
*.Foam Hold-down Frame adjustable by motor, being used to fix the material on table.
*.Central knife guidance can be manually adjusted & which can be taken apart.
*.It can cut densities from 10 to 90kg/cubic meter in flexible & rebonded foam.
*.Cutting speed adjustment for different densities by software.
*.Circulating band knife CS 0.7 mm x 4mm is servo twistable by plus minus 370 Degrees automatically.
*.Standard Electric supply is 3 phase 415 Volts 50Hz other supply voltage machines can be provided on request for use in all countries.
*. Error diagnostic software provides easy diagnosis of faults on computer screen.